Lumitec eliminates external controllers and simplifies wiring with Timed Toggle Protocol
Professional boaters know accessories and their wiring can be a true blessing or an absolute nightmare. A blessing when it is simple and easy to connect and works the way you thought it would. A nightmare when you are stuck in a hull trying to make several connections to and from various parts of a system, then it doesn’t work and you have to go back in. No matter what you do, boat accessories and their wiring will also be exposed to damaging elements including salt air, moisture, vibration, electrical noise, wind, sunlight, and chemicals throughout their life cycle.
“The salt air alone is enough to corrode and render most wire connections inoperable,” said Hank Johnson in Louisiana Sportsman. “Boat bilges can be contaminated with fuel, grease and other chemicals that will eat away at your wires. It is extremely important that you purchase quality marine switches, wire, terminals and all other superior components for your accessory system.”
One way to mitigate the degrading effects of the elements is to have fewer things that could go wrong. Keep things simple and reduce the amount of accessories and wiring needed. Lumitec Lighting has eliminated the need for external controllers with simple wiring for their lights. In many cases you can retain the original wiring system and control colors, dimming, and other functionality such as strobing effects with a simple toggle switch. This is made possible by their proven Timed Toggle Protocol (TTP) technology. TTP enabled lights make it possible to provide sophisticated lighting features without the need for additional external control modules. Using this one-of-a-kind innovation, you can sidestep the entire process of rewiring by using Lumitec lights with TTP. TTP uses simple brief off/on toggle of your switch to control your lights.
Many boat lighting solutions come with bulky control modules that are expensive, takes up precious space, could be highly confusing to wire, and can require more wiring and connections, and are thus expensive to install. Lumitec’s TTP allows for an easy to install option, with simply the two power wires, making it easy to use and integrate with the boat’s existing wiring system.
“TTP is Lumitec’s innovative solution for offering the end user the ability to dim lights, change colors, or invoke other cool features using a standard two wire hook up,” said John Kujawa, President of Lumitec. “Installation is just like any other marine light: red to red and black to black. Any normal on/off switch can be used to control the light.”
Lumitec has grown from a small start up in 2007 to a market leading international LED lighting manufacturer because of its dedication to meeting high performance and reliability demands with innovative solutions. Their products are now found on many of the finest boats and yachts in the world because of this dedication to performance, attention to aesthetics, and ease of use.
“The dimming of a Lumitec TTP enabled light is pretty easy,” Kujawa said. “The light is turned on and it ramps intensity over the course of about three seconds. If nothing else is done, that peak intensity will be held until the light is turned off. If the user wishes for a less intense light, they can dim the output by interrupting that ramp. You can turn the light off and immediately back on and the light intensity will be held wherever it was interrupted by the brief off/on toggle.
“Color change is also really easy. The user simply turns the light off and on, quickly. Each quick, off/on toggle cycles the light to its next available color.”
Because the lights require nothing more than a simple two wire hookup and require no external control boxes to support the changes, TTP enabled lights can be easily retrofitted into an older system without rewiring. New boat manufacturers can streamline the lighting installation process by saving on both supply cost and installer time while also conserving space onboard. With fewer parts to deal with, there is less risk of component failure while still providing extensive functionality.
While many manufacturers continue to use large control boxes for their lighting solutions, or are attempting to integrate complicated Bluetooth or WiFi technology into lighting control, TTP offers a beautifully simple solution immediately capable of integrating into new or older systems with no learning curve. More than 200 boat manufacturing clients that include, Intrepid Powerboats, Contender, Grady White, Edge Water Power Boats, Viking Yachts, and Boston Whaler to name a few, are using Lumitec lights with TTP technology.
Lumitec’s TTP technology changes the boat lighting game with a quick, easy solution that will fit into even the tightest of spaces without additional equipment or expensive rewiring endeavors. With fewer components and wires to connect, there are less opportunities for incorrect connections and their associated frustrations and damage from the elements, resulting in a more reliable but simply elegant solution. Lumitec’s pursuit of innovation is constantly pushing the boundaries of LED lighting technology, right here in the USA at their development lab at Delray Beach, Florida.
If you’d like to see more of how Lumitec is changing the LED lighting game, visit lumiteclighting.com.