Menu

poco-logo

DIGITAL LIGHTING CONTROL

Digital Lighting Control Products

Poco_Graphic_update

Poco- Digital Lighting Control

Lumitec is proud to introduce Poco Digital Lighting Control. The low-cost easy to install, easy to set up and configure, onboard digital lighting control system. Now you can have full control over all your Lumitec (PLI enabled) lights at the touch of a button from any compatible MFD or connected smart device.

 

  • Simple to install and configure
  • Cost much less than compatible systems
  • Can be retrofitted with no additional wire runs
  • Can be controlled through compatible MFD or connected smart device
  • Works with a standard 2-wire system

What is PLI Enabled?

PLI (Power Line Instruction) is Lumitec's proprietary technology that provides advanced functionally to multi-mode lights. Any Lumitec product that is PLI enabled and connected to a Poco Digital Lighting Control module will allow functions like, color change, color selection, dimming, and advanced features such as preset custom color modes and virtual circuits.

Poco_Module

| Controlled through a compatible MFD or connected smart device |

POCO FEATURES

Easy to Setup & Configure

Poco is easy to configure through our intuitive software interface. Light groups, switches, scenes and modes, all can be set up or edited right from an onboard MFD or connected tablet or smartphone. giving you unprecedented lighting control at your fingertips.

Easy To Install

The Poco Digital Lighting Control module is a simple 2-wire installation and can replace up to 4 conventional on/off switches or dimmer modules.  The Poco module controls up to 4 channels and up to 32 “virtual circuits” and requires no additional command wires.

Easy on Your Budget

The Poco Digital Lighting Control system is very cost-effective, reduces the number of required physical circuits, wires, and switches, which allows builders to save money while offering their customers the sophisticated control previously found only on high-end yachts.

| Extend the reach of your system with Pico Expansion Modules |

Pioc Expansion Modules

Pico Expansion Modules extend the power and reach of the Poco Digital Lighting Control system making it possible to control other manufacturers’ luminaires, lighting accessories and devices that do not have the sophisticated PLI technology built-in.

 

  • Control third-party lights, lighting accessories and devices
  • Compatible with Poco Digital Lighting Control system
  • Can be retrofitted with no additional wire runs
  • Simple in-line installation
  • Works with standard 2-wire system
  • Two options available (P-1 and C-4)

Pico_Graphic

The Pico C-4 module provides Poco or TTP control of third party RGB or RGBW lighting accessories. This means that everything from lighted speakers, to cupholders, to yacht letters can be controlled through the Poco system and seamlessly integrated into the vessel’s overall lighting scheme. On vessels not equipped with the Poco system, the Pico C-4 provides control of color and intensity through any normal on/off switch, using Lumitec’s field-proven TTP protocol.

 

The Pico P-1 module acts as an in-line solid-state relay, controlling any large load up to 20 Amps with on/off and PWM dimming control*. When used in conjunction with a Poco system, lights and other loads can be controlled through an on-board MFD, smartphone or tablet

For More Information on

Lumitec products call (561) 272.9840

1402 Poinsettia Drive, Suite 110, Delray Beach, Florida 33444

Show your support and

follow us on social media

Browse Products

Browse our complete product range by their specific type of application use.

Where To Buy

Find one of our many retailer or
distributor locations near you.

Support Center

Find support on everything from troubleshooting issues to warranty claims.

Top