Menu

TTP-IconTimed Toggle Protocol

 

What is “TTP”?

TTP, or Timed Toggle Protocol, is a beautifully simple solution to an otherwise vexing problem: How to provide sophisticated features like dimming and color change with no external control modules, using any standard off-the-shelf switch. Frequently emulated to the point of being almost an industry standard, Lumitec’s innovative TTP control uses brief “off/on” toggles of the light’s power switch to select an intensity level or cycle through output colors.

 

How does it work?

The light is installed like any 12 or 24VDC light using a positive and negative power wire controlled by any standard on/off switch. Lights with dimming functionality ramp up in intensity over a period of about 4 seconds when initially turned on.  A brief "off/on" toggle of the switch during the ramp phase will interrupt the ramp and hold the light at that intensity. To change the output color or output mode of multi-color or multi-output lights with TTP technology, briefly toggle the light OFF then immediately back ON. The light will cycle to the alternate or next output color.

 

Use the diagram below for the correct operation procedure for TTP.

To Dim TTP-Equipped lights

Lumitec Lights with dimming functionality ramp up in intensity over a period of about 4 seconds when initially turned on.  A brief “Off/On” toggle of the switch during the ramp phase will interrupt the ramp and hold the light at that intensity. If the light is already on then turn the switch off and repeat steps 1 & 2.

troubleshooting-hands-1
troubleshooting-hands-2

To change colors or change output modes of
TTP-Equipped lights

Multi-color or multi-output lights may incorporate Lumitec’s TTP technology.  To change the output color or output mode of a light, briefly toggle the light OFF then immediately back ON.  The light will cycle to the alternate or next output color

Turn Switch to “On” position and wait for four seconds until the light ramps up to full intensity.

Toggle switch “Off/On” quickly to change modes. Once for each mode.

troubleshooting-hands-3
troubleshooting-hands-4

For more assistance contact customer service of call (561) 272-9840

Browse Products

Browse our complete product range by their specific type of application use.

Where To Buy

Find one of our many retailer or
distributor locations near you.

Support Center

Find support on everything from troubleshooting issues to warranty claims.

For more information on

Lumitec products call 1-561-272-9840

1405 Poinsettia Drive, Suite 10, Delray Beach, Florida 33444

Show your support and

follow us on social media

logobar
Top